Nortel Networks ALTEON OS BMD00007 - Manual (Page 253)

Alteon OS Command Reference
The Configuration Menu „ 255 BMD00007, November 2007
/cfg/l3/if
IP Interface Configuration
The GbE Switch Module can be configured with up to 128 IP interfaces. Each IP interface repre-
sents the GbE Switch Module on an IP subnet on your network. The Interface option is disabled
by default.
N OTE – To maintain connectivity between the management module and the GbE Switch Mod-
ule, use the management module interface to change the IP address of the switch.
[IP Interface 1 Menu]
addr - Set IP address
mask - Set subnet mask
vlan - Set VLAN number
relay - Enable or disable BOOTP relay
ena - Enable interface
dis - Disable interface
del - Delete interface
cur - Display current interface configuration
Table 6-56 IP Interface Menu Options (/cfg/l3/if)
Command Syntax and Usage
addr
Configures the IP address of the switch interface using dotted decimal notation.
mask
Configures the IP subnet address mask for the interface using dotted decimal notation.
vlan
Configures the VLAN number for this interface. Each interface can belong to one VLAN, though
any VLAN can have multiple IP interfaces in it.
relay disable|enable
Enables or disables the BOOTP relay on this interface. It is enabled by default.
ena
Enables this IP interface.
dis
Disables this IP interface.