Nortel Networks ALTEON OS BMD00007 - Manual (Page 37)

Alteon OS Command Reference
First-Time Configuration „ 37 BMD00007, November 2007
3. Configure Gigabit Ethernet port autonegotiation mode.
If you selected a port that has a Gigabit Ethernet connector, the system prompts:
Enter on to enable port autonegotiation, off to disable it, or press to keep the current
setting.
4. If configuring VLANs, enable or disable VLAN tagging for the port.
If you have selected to configure VLANs back in Part 1, the system prompts:
Enter d to disable VLAN tagging for the port or enter e to enable VLAN tagging for the port.
To keep the current setting, press .
5. The system prompts you to configure the next port:
When you are through configuring ports, press without specifying any port. Other-
wise, repeat the steps in this section.
Port Auto Negotiation:
Current Port EXT1 autonegotiation: on
Enter new value ["on"/"off"]:
Port VLAN tagging config (tagged port can be a member of multiple VLANs)
Current TAG support: disabled
Enter new TAG support [d/e]:
Enter port (INT1-14, MGT, EXT1-4):