Nortel Networks ALTEON OS BMD00007 - Manual (Page 309)

Alteon OS Command Reference
The Configuration Menu „ 311 BMD00007, November 2007
/cfg/qos/dscp
DSCP Configuration
Use this menu map the DiffServ Code Point (DSCP) value of incoming packets to a new value,
or to an 802.1p priority value.
[dscp Menu]
dscp - Remark DSCP value to a new DSCP value
prio - Remark DSCP value to a 802.1p priority
on - Globally turn DSCP remarking ON
off - Globally turn DSCP remarking OFF
cur - Display current DSCP remarking configuration
Table 6-102 DSCP Menu Options (/cfg/qos/dscp)
Command Syntax and Usage
dscp <0-63> <0-63>
Maps the initial DiffServ Code Point (DSCP) value to a new value. Enter the DSCP value (0-63) of
incoming packets, followed by the new value.
prio
Maps the DiffServ Code point value to an 802.1p priority value. Enter the DSCP value, followed
by the corresponding 802.1p value.
on
Turns on DSCP re-marking globally.
off
Turns off DSCP re-marking globally.
cur
Displays the current DSCP parameters.