Nortel Networks ALTEON OS BMD00007 - Manual (Page 311)

Alteon OS Command Reference
The Configuration Menu „ 313 BMD00007, November 2007
/cfg/acl/acl < ACL number>
ACL Configuration
These menus allow you to define filtering criteria for each Access Control List (ACL).
[ACL 1 Menu]
ethernet - Ethernet Header Options Menu
ipv4 - IP Header Options Menu
tcpudp - TCP/UDP Header Options Menu
meter - ACL Metering Configuration Menu
re-mark - ACL Re-mark Configuration Menu
pktfmt - Set to filter specific packet format types
egrport - Set to filter for packets egressing this port
action - Set filter action
stats - Enable/disable statistics for this acl
reset - Reset filtering parameters
cur - Display current filter configuration
Table 6-104 ACL Menu Options (/cfg/acl/acl x)
Command Syntax and Usage
ethernet
Displays the ACL Ethernet Header menu. To view menu options, see page 314 .
ipv4
Displays the ACL IP Header menu. To view menu options, see page 315 .
tcpudp
Displays the ACL TCP/UDP Header menu. To view menu options, see page 317 .
meter
Displays the ACL Metering menu. To view menu options, see page 318 .
re-mark
Displays the ACL Re-mark menu. To view menu options, see page 319 .
pktfmt
Displays the ACL Packet Format menu. To view menu options, see page 322 .
egrport
Configures the ACL to function on egress packets.
action permit|deny|setprio <0-7>
Configures a filter action for packets that match the ACL definitions. You can choose to permit
(pass) or deny (drop) packets, or set the 802.1p priority level (0-7).