Nortel Networks ALTEON OS BMD00007 - Manual (Page 296)

Alteon OS Command Reference
298 „ The Configuration Menu BMD00007, November 2007
/cfg/l3/bootp
Bootstrap Protocol Relay Configuration
The Bootstrap Protocol (BOOTP) Relay Menu is used to allow hosts to obtain their configura-
tions from a Dynamic Host Configuration Protocol (DHCP) server. The BOOTP configuration
enables the switch to forward a client request for an IP address to two DHCP/BOOTP servers
with IP addresses that have been configured on the
GbE Switch Module .
BOOTP relay is turned off by default.
[Bootstrap Protocol Relay Menu]
addr - Set IP address of BOOTP server
addr2 - Set IP address of second BOOTP server
on - Globally turn BOOTP relay ON
off - Globally turn BOOTP relay OFF
cur - Display current BOOTP relay configuration
Table 6-92 Bootstrap Protocol Relay Configuration Menu Options (/cfg/l3/bootp)
Command Syntax and Usage
addr
Sets the IP address of the BOOTP server.
addr2
Sets the IP address of the second BOOTP server.
on
Globally turns on BOOTP relay.
off
Globally turns off BOOTP relay.
cur
Displays the current BOOTP relay configuration.