Nortel Networks ALTEON OS BMD00007 - Manual (Page 275)

Alteon OS Command Reference
The Configuration Menu „ 277 BMD00007, November 2007
/cfg/l3/ospf/virt
OSPF Virtual Link Configuration
[OSPF Virtual Link 1 Menu]
aindex - Set area index
hello - Set hello interval in seconds
dead - Set dead interval in seconds
trans - Set transit delay in seconds
retra - Set retransmit interval in seconds
nbr - Set router ID of virtual neighbor
key - Set authentication key
mdkey - Set MD5 key ID
enable - Enable interface
disable - Disable interface
delete - Delete interface
cur - Display current OSPF interface configuration
Table 6-73 OSPF Virtual Link Configuration Menu Options (/cfg/l3/ospf/virt)
Command Syntax and Usage
aindex
Configures the OSPF area index.
hello
Configures the authentication parameters of a hello packet, in seconds.
dead
Configures the health parameters of a hello packet, in seconds. Default is 60 seconds.
trans
Configures the delay in transit, in seconds. Default is one second.
retra
Configures the retransmit interval, in seconds. Default is five seconds.
nbr
Configures the router ID of the virtual neighbor. Default is 0.0.0.0.
key
Configures the password (up to eight characters) for each virtual link. Default is none.
mdkey |none
Sets MD5 key ID for each virtual link. Default is none.
enable
Enables OSPF virtual link.