Nortel Networks ALTEON OS BMD00007 User Manual
Page 194
Alteon OS Command Reference
196
The Configuration Menu
BMD00007, November 2007
comm
The community table contains objects for mapping community strings and version-independent
SNMP message parameters. To view menu options, see
taddr
This command allows you to configure destination information, consisting of a transport domain
and a transport address. This is also termed as transport endpoint. The SNMP MIB provides a
mechanism for performing source address validation on incoming requests, and for selecting com-
munity strings based on target addresses for outgoing notifications. To view menu options, see
.
tparam
This command allows you to configure SNMP parameters, consisting of message processing
model, security model, security level, and security name information. There may be multiple trans-
port endpoints associated with a particular set of SNMP parameters, or a particular transport end-
point may be associated with several sets of SNMP parameters. To view menu options, see
.
notify
A notification application typically monitors a system for particular events or conditions, and gen-
erates Notification-Class messages based on these events or conditions. To view menu options, see
.
v1v2 disable|enable
This command allows you to enable or disable the access to SNMP version 1 and version 2. This
command is enabled by default.
cur
Displays the current SNMPv3 configuration.
Table 6-10 SNMPv3 Configuration Menu Options (/cfg/sys/ssnmp/snmpv3)