Nortel Networks ALTEON OS BMD00007 - Manual (Page 319)

Alteon OS Command Reference
The Configuration Menu „ 321 BMD00007, November 2007
/cfg/acl/acl < ACL number>/re-mark/inprof/up1p
Update User Priority Configuration
[Update User Priority Menu]
value - Set the update user priority
utosp - Enable/Disable use of TOS precedence
reset - Reset in profile up1p settings
cur - Display current settings
Table 6-111 ACL Re-Mark User Priority Menu (/cfg/acl/acl x/re-mark/inprof/up1p)
Command Syntax and Usage
value <0-7>
Defines 802.1p value. The value is the priority bits information in the packet structure.
utosp enable|disable
Enable or disable mapping of TOS (Type of Service) priority to 802.1p priority for In-Profile
packets. When enabled, the TOS value is used to set the 802.1p value.
reset
Resets UP1P settings to their default values.
cur
Displays current Re-Mark In-Profile User Priority parameters.