Nortel Networks 8010co - Manual (Page 75)

75
Installing the Breaker Interface Panel for the Ethernet Routing Switch 8010co Chassis
Appendix B
BIP external cable pin assignments
This appendix describes the breaker interface panel connectors.
This appendix covers the following topics:
• “Shelf alarm connectors (J1 and J2) ,” next
• “Office alarm connectors (J3 and J4)” on page 77
• “Standalone office alarm connector (J5)” on page 79
Shelf alarm connectors (J1 and J2)
The BIP shelf alarm connectors (J1 and J2) use standard 9-pin D-sub connectors
(
Figure 45 ).
Figure 45 J1 and J2 9-pin standard D-sub connector
Figure 46 on page 76 shows the pinouts for the J1 and J2 shelf alarm connectors.
10436EA
6 9
1 5