Nortel Networks 8010co - Manual (Page 15)

15
Installing the Breaker Interface Panel for the Ethernet Routing Switch 8010co Chassis
Preface
The breaker interface panel (BIP) provides power distribution and alarm status
indications for one or two 8010co chassis in an equipment rack. The status
indications can be linked to other BIPs to provide total system status to the central
office (CO).
This guide describes how to install the breaker interface panel in an equipment
rack, connect cables, and interpret LEDs. It also includes technical specifications
for the breaker interface panel.
For a list of related publications, see the release notes that accompany your
software.
Before you begin
This guide is intended for qualified service personnel who need to install or
replace a breaker interface panel. A qualified service person must have
appropriate technical training and experience and be aware of hazards involved in
installing and replacing customer-replaceable units (CRUs).