National Instruments FP-3000 - Manual (Page 88)

Appendix B Fieldbus Parameters
FieldPoint FP-3000 User Manual B-10 www.ni.com
Note The device does not use this parameter to restrict parameter access itself. It is only
for the benefit of host applications.
HARD_TYPES (I/O, Process)
A list of available channel types. As I/O modules are inserted and removed
from the FP-3000 bank, bits in this field change to reflect the presence or
absence of types of I/O channels.
HI_ALM (Alarming)
The current state of the high alarm, along with a time and date stamp.
HI_HI_ALM (Alarming)
The current state of the high-high alarm, along with a time and date stamp.
HI_HI_LIM (Alarming)
The limit, in PV units, beyond which the high-high limit alarm is
considered active.
HI_HI_PRI (Alarming)
The priority of the high-high limit alarm.
HI_LIM (Alarming)
The limit, in PV units, beyond which the high limit alarm is considered
active.
Table B-4. Hard Types
Bitmask Description
Analog Input This bit is set if the FP-3000 has analog input channels
available.
Analog Output This bit is set if the FP-3000 has analog output channels
available.
Discrete Input This bit is set if the FP-3000 has discrete input channels
available.
Discrete Output This bit is set if the FP-3000 has discrete output channels
available.