Table c-7. block events, Last_run_error, Lo_lo_out_d – National Instruments FP-3000 User Manual
Page 111: Lo_out_d, Ltype_domain_index, Nvm_life
Appendix C
FP-3000 Specific Parameters
© National Instruments Corporation
C-9
FieldPoint FP-3000 User Manual
LAST_RUN_ERROR
The last run error detected by the block (used for debugging).
LO_LO_OUT_D
Discrete output indicating state of Lo-Lo alarm condition.
LO_OUT_D
Discrete output indicating state of Lo alarm condition.
LTYPE_DOMAIN_INDEX
Virtual field device index of the domain associated with expression in this
AI block.
NVM_LIFE
Remaining useful life of non-volatile memory (NVM).
Table C-7. Block Events
Event
Description
CLASS
The type of event detected.
Configuration Error: An error has been detected in the
configuration of the block.This is usually due to an uninitialized static
parameter. The block updates its
TARGET
mode to
Out of Service
and posts a block alarm.
Operational Warning: The block detected a non-critical event.
The block continues to execute normally.
Operational Error: The block detected a critical event. The block
continues to execute in a higher priority mode.
Internal Error: The firmware detected an internal error.
MSG
A message containing specific details describing the event.
BLOCK_IDX
The index of the block causing the event.
PARAM_IDX
The index of the parameter causing the event.
TARGET_MODE
The
TARGET
mode of the block when the event was detected.
ACTUAL_MODE
The
ACTUAL
mode of the block when the event was detected.
TIME_STAMP
Time when the error was detected.