National Instruments FP-3000 - Manual (Page 109)

Appendix C FP-3000 Specific Parameters
© National Instruments Corporation C-7 FieldPoint FP-3000 User Manual
FP_NOISE_REJECTION
Allows the noise rejection filter of an Analog Input module to be adjusted.
FP_PWM_520_PERIOD
The period of the pulse width modulated waveform, in milliseconds.
FP_RTD_122_RANGE
Allows the range of a channel on a FieldPoint FP-RTD-122 to be adjusted.
FP_RTD_TYPE
Allows adjustment of the RTD type of a channel on an FP-TC-122 module.
FP_TC_120_CJ_RANGE
Allows the range of the cold junction compensation channel on a
FieldPoint FP-TC-120 to be adjusted.
FP_TC_120_RANGE
Allows the range of a channel on a FieldPoint FP-TC-120 to be adjusted.
FP_THERMOCOUPLE_TYPE
Allows adjustment of the thermocouple type of a channel on an FP-TC-120
module.
HI_HI_OUT_D
Discrete output indicating state of Hi-Hi alarm condition.
Module in Configuration There is a module in the specified position, the FP-3000 has
attempted to configure the module, and the module is in the
process of configuration.
Module Okay There is a module in the specified position, and it is
configured and operating correctly.
Incorrect Module for Block There is a module in the specified position, but the block is
incompatible with the module.
Table C-6. Module Status (Continued)
Status Description