National Instruments FP-3000 User Manual

Page 146

Index

Index-4

bringing block online, 3-6
creating FP-AI-110 block, 3-3
getting started, 3-2
scaling the reading, 3-4 to 3-5
selecting module and

channel, 3-3 to 3-4

setting input range, 3-4
setting up scheduling, 3-5 to 3-6

initial power on: assigning address and

device tag, 3-1 to 3-2

temperature control with

FP-3000, 3-7 to 3-17

alarm setting, 3-17
controlling heating

element, 3-11 to 3-13

getting started, 3-7
PID control, 3-13 to 3-17
taking temperature

readings, 3-8 to 3-10

EXECUTION_STATISTICS parameter

(table), C-4 to C-5

execution time for FP-3000 Network Module,

determining, F-8

EXPR_DOMAIN_INDEX parameter, C-5
Expression block, 4-5 to 4-15

data types supported, 4-5 to 4-6
features, 4-5
functions

function descriptions

(table), 4-11 to 4-14

function operators (table), 4-11
intrinsic functions, 4-10

program constructs, 4-7 to 4-14

constants, 4-8
delimiters, 4-10
flow control, 4-10
functions, 4-10 to 4-14
operators (table), 4-9
reserved symbols, 4-7 to 4-8

status calculation rules, 4-6
syntax rules, 4-6 to 4-7

fault state for function blocks, D-4
FAULT_STATE parameter, B-7
FEATURE_SEL_FEATURES parameter

(table), B-7 to B-8

FF_GAIN parameter, B-8
FF_SCALE parameter, B-8
FF_VAL parameter, B-8
FIELD_VAL parameter, B-8
FIELD_VAL_D parameter, B-9
Fieldbus communication problems

overview, F-1
problems and solutions (table), F-2 to F-3
setting device tag and network

address, F-1

Fieldbus network, connecting to

FP-3000, 2-10 to 2-13

Fieldbus parameters, B-1 to B-24

ACK_OPTION, B-1
ALARM_HYS, B-1
ALARM_SUM, B-1
ALERT_KEY, B-1
BAL_TIME, B-1
BIAS, B-2
BKCAL_HYS, B-2
BKCAL_IN, B-2
BKCAL_OUT, B-2
BKCAL_OUT_D, B-2
BLOCK_ALM, B-2
BLOCK_ERR (table), B-2 to B-4
BYPASS, B-4
CAS_IN, B-4
CAS_IN_D, B-4
CHANNEL, B-4
CLR_FSTATE, B-5
CONFIRM_TIME, B-5
CONTROL_OPTS (table), B-5 to B-6
CYCLE_SEL, B-6
CYCLE_TYPE, B-6
DD_RESOURCE, B-6