NEC 1080Xd - Manual (Page 83)

Service Processor 3-33
Table 3-35. HC Subcommands
cmd arg1 arg2 arg3 arg4 Description
help - - - - Displays the list of subcommands.
This command can be executed in the AC
POWER ON or DC POWER ON state.
quit
exit - - - - Exits from the HC command.
Before an exit, the check subcommand is
automatically executed.
This command can be executed in the AC
POWER ON state or DC POWER ON state.
- - - - Used to display states.
Displays Help for “disp” when the argument is
omitted or an error exists.
This command can be executed in the AC
POWER ON or DC POWER ON state.
disp
all - - - Displays all the states.
part - - - Displays the following partition division
information for each partition:
• State summary
• Physical CELLV Board number and logical
CELLV Board number
• Physical IOR chip number and logical IOR chip
number.
main - - - Displays the state summary of the system
configuration.
cellx - - - Displays the state of the CELLV Board.
“x” is the physical CELLV Board number (0-3).
mmcxy - - - Displays the detailed state of the ROW under
control of the MMC specified by “xy”.
“x” is the physical CELLV Board number (0-3) on
which MMC is installed.
“y” is the MMC number (0-1) in the CELLV
Board.
tagx - - - Displays the detailed state of the TAG.
“x” is the physical CELLV Board number (0-3) on
which TAG is installed.
xbcx - - - Displays the state of the XBC chip.
“x” is the physical XBC chip number (0-1).