NEC 1080Xd - Manual (Page 75)

Service Processor 3-25
DP (System Dump)
Execution:
This command can be executed on a partition if Automatic startup has completed or the
UP command has been executed. (The partition is in the DC POWER ON state.)
Function:
This command generates a dump interrupt in the system.
The actual operation of the dump processing and the following system reset depend on
the software (OS or BIOS). This command only generates a dump interrupt.
Obviously, nothing happens if no software is running.
Note: The DP command can be executed in Normal mode or
Maintenance mode.
Table 3-27. DP Screen
Screen Image Reference
iSPyz:---> dp
Dump button interrupt will be generated.
Enter partition number (0-3/all/CR=exit) : all A
Execute OK? (y/[n]) y B
DP command was accepted. Dump button interrupt will be generated soon. C
[iSPyz:INFO.ccc] partition 0 : dump button interrupt.
[iSPyz:INFO.ccc] partition 1 : dump button interrupt.
:
:
:
D
Table 3-28. DP Screen References
Reference Description
A Enter a partition number.
If you select “all,” al configured partitions become the targets.
B Displays the confirmation message.
To continue, enter “y”.
C Displays the command acceptance message.
The actual process runs in the background.
D Displays the state of the process running in the background.