NEC 1080Xd - Manual (Page 58)

3-8 Service Processor
OS (BIOS) Console
When you select the OS (BIOS) Console on the iSP Main Menu, input/output is
redirected to the OS (BIOS) serial controller.
To return to the Main Menu, press ^B (CTRL+B).
The image displayed and the operation during redirection depend on the BIOS and OS
running in the partition; they are therefore not recognized by the service processor
firmware (iSPFW).
Table 3-6. OS (BIOS) Console Operation
Screen Image Reference
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> 0<ENTER>
*****redirection of serial console 0
*****
*****enter CTRL+B to quit *****
:
:
:
:
:
<CTRL>+<B>
*****returned from serial console 0 redirection *****
A
B
C
D
E
Table 3-7. Login and Main Menu Screen References
Reference Description
A
When you enter 0-3, the menu is redirected to the OS Console of the corresponding
partition.
B The starting message of OS Console redirection is displayed.
C “:” is input and output during the OS Console redirection depend on the OS and
BIOS.
D Pressing ^B terminates the redirection of the OS Console.
E A message is displayed to indicate the end of the redirection. Returns to Main Menu.