NEC 1080Xd - Manual (Page 69)

Service Processor 3-19
DL (Display SP Logs)
Execution:
This command can be executed in the AC POWER ON state or DC POWER ON state.
Function:
This command displays the logs stored in the iSP. You can upload the logs as a file to
an FTP server.
The detailed log (HW fatal-iSP snapshot) is linked and managed with the activity log
entry. When the log storage area is full, a new activity log is written over the oldest
activity log. When this happens, you cannot refer to the oldest detailed log. You should
display the important log and store it as a screen log of the terminal software. Or,
upload the important log to the FTP server.
Note: The DL command can be executed in Normal mode or
Maintenance mode.
Table 3-23. DL Screen
Screen Image Reference
iSPyz:---> dl
Log area status (03/01/2002 18:59:00 iSPFW R01.01):
Type Entries Latest No. Earliest Latest
--------------------- --------- -------------- ------------------------------- ----------------------------------
activity
1000 404 01/31/2002 12:24:50 02/29/2004 13:54:12
HW fatal 16 0 01/31/2002 12:24:50 02/29/2004 13:54:12
HW recoverable 64 32 01/31/2002 12:24:50 02/29/2004 13:54:12
processor MCA 128 20 01/31/2002 12:24:50 02/29/2004 13:54:12
processor CMC 64 2 01/31/2002 12:24:40 02/29/2004 13:54:12
processor INIT 64 1 01/31/2002 12:24:40 01/31/2002 13:54:12
system dump 8 7 01/31/2002 12:24:40 02/29/2004 13:54:12
iSP snapshot 8 3 02/29/2004 15:34:51 02/29/2004 13:54:12
A
Display or FTP upload the activity logs? (d[isplay]/f[tp]/CR=exit) : f B
IP of FTP server [default=10.0.0.2] (CR=skip) : 10.0.0.3
account [default=necuser] : necuser
password [default=********] : xxxxxxxx
file path : log/activity.log
connecting...
connected.
uploaded.
C
Display or FTP upload? (d[isplay]/f[tp]/CR=back) : d D
Filter logs by partition? (a[ll]/0-3/CR=back) : a E