NEC 1080Xd - Manual (Page 208)

C-6 Windows 2003 Installation
10. Clone the Disk ID (GUID) as shown below.
Note: Use the following examples as a reference for performing the
procedures. Information will vary for your computer and drives.
C:\ >bootcfg /list 0
Partition table info for Disk: 0
-----------------------------------
Partition No: 1
Partition Style: GPT
Starting offset: 32,256
Partition length: 213,825,024
Partition GUID: {68d298c0-1b6a-01c1-507b-9e5f8078f531}
GUID type: {c12a7328-f81f-11d2-ba4b-00a0c93ec93b}
Partition name: EFI system partition
..........
C:\ >bootcfg /list 1
Partition table info for Disk: 1
-----------------------------------
Partition No: 1
Partition Style: GPT
Starting offset: 17,408
Partition length: 213,909,504
Partition GUID: {476688c5-8ebf-47d2-80e7-cf9d065edb81}
GUID type: {c12a7328-f81f-11d2-ba4b-00a0c93ec93b}
Partition name: EFI system partition
..........
(NOTE: The following is an example only. Use the GUID numbers displayed in the
previous two steps that appear for YOUR system.)
C:\>bootcfg /clone /sg {68d298c0-1b6a-01c1-507b-9e5f8078f531} /tg
{476688c5-8ebf-47d2-80e7-cf9d065edb81} /d+ Cloned_Entry
INFO: Boot entry whose id is '1' successfully cloned.
INFO: Boot entry whose id is '5' successfully cloned.
SUCCESS: The operation completed successfully.
11. Manage the EFI boot menu:
1: Windows Server 2003, Enterprise
2: EFI Shell
3: Boot Mirror C: - secondary plex
4: Windows Server 2003, Enterprise Cloned_Entry
5: Boot Mirror C: - secondary plex Cloned_Entry
! Reboot the partition.
! Enter the EFI boot manager.
! Change the boot order to:
1: Windows Server 2003, Enterprise
2: Boot Mirror C: - Secondary plex Cloned_Entry
3: EFI SHELL