NEC 1080Xd - Manual (Page 206)

C-4 Windows 2003 Installation
2. Delete any partition on Disk 1 (see the following example).
Note: Use the following examples as a reference for
performing the procedures. Information will vary for your
computer and drives.
C:\ >diskpart
Microsoft DiskPart version 5.2.3790
Copyright (C) 1999-2001 Microsoft Corporation.
On computer: Your Computer
DISKPART> select disk 1
Disk 1 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ----------------- ------- -------
Partition 1 Reserved 128 MB 17 KB
[note]: if no partition is displayed, skip to Step 3
DISKPART> select partition 1
Partition 1 is now the selected partition.
DISKPART> delete partition override
DiskPart successfully deleted the selected partition.
3. Display partitions on Disk 0 as shown below:
DISKPART> select disk 0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 345 MB 32 KB
#---- EFI PARTITION ON
Partition 2 Reserved 996 MB 204 MB PRIMARY
Partition 3 Primary 2000 MB 3200 MB
Partition 4 Reserved 126 MB 9 GB
#--- WINDOWS RESERVED
PARTITION
4. Create mirror partitions on Disk 1 as shown below:
DISKPART> select disk 1
Disk 1 is now the selected disk.
DISKPART> create partition efi size=345
DiskPart succeeded in creating the specified partition.
DISKPART> create partition msr size=126
DiskPart succeeded in creating the specified partition.
DISKPART> list partition
Partition ### Type Size Offset
------------- --------------- ------- -------
Partition 1 System 345 MB 17 KB
#---- NEW EFI PARTITON
*Partition 2 Reserved 126 MB 204 MB #---- NEW MSR PARTIION ON
YOUR_COMPUTER