NEC 1080Xd - Manual (Page 33)

System Operation 2-5
A AC Power Circuit Breaker
Figure 2-4. PCIX Unit AC Power Circuit Breaker
5. On the front of the server cabinet, power on the AC POWER switch at the
top of the system (see Figure 2-5).
A AC Power Switch
Figure 2-5. AC Power Switch
Note: If the AC-Link function has been enabled, following the AC
power being turned on, and if the operating system has been installed,
the system will automatically boot up the operating system without
further intervention (refer to the description of the SU command in the
Express5800/1080X Service Guide).
If the AC-Link function has not been enabled, then continue with this
“Starting Up the System” procedure.
A
A