NEC 1080Xd - Manual (Page 105)

Service Processor 3-55
PC (Power Cycle)
Execution:
This command can be executed on a partition in the following state:
! Automatic startup completed
! Execution of UP command.
The partition is in a DC POWER ON state.
Function:
Turns off the power (DC) of the system, and then turns it on again to start up the
system.
Note: This command turns off the system regardless of the
operation state of the OS or BIOS and without notifying either.
Note: The PC command can be executed in Normal mode or
Maintenance mode.
Table 3-43. PC Display Screen
Screen Image Reference
iSPyz:---> pcENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-3/all/CR=exit) : all A
Execute OK? (y/[n]) y B
PC command was accepted. System power of all partitions will be turned off soon and
then will be turned on. C
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz:INFO.ccc] partition 0 : power on sequence started.
[iSPyz:INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys:INFO.ccc] partition 1 : handed off the control to BIOS.
D