NEC 1080Xd - Manual (Page 59)

Service Processor 3-9
Table 3-8. OS (BIOS) Console Events and Operations
Event Operation
^B (CTRL+B) is pressed. Displays a message indicating the exit of the
session from the OS (BIOS) Console and then
returns to the Main Menu and prompt.
The SP command deletes the displayed
partition. Displays a message indicating the exit of the
session from the OS (BIOS) Console and then
returns to the Main Menu and prompt.
Virtual SOP
When you select Virtual SOP (Virtual System Operator Panel) on the iSP Main Menu,
Virtual SOP appears. The Virtual SOP periodically refreshes the display of the state of
all the partitions.
To return to the Main Menu from the Virtual SOP, press ^B (CTRL+B).
Table 3-9. Virtual SOP Screen
Screen Image Reference
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING )
1) OS(BIOS) serial console of partition#1 (RUNNING )
2) OS(BIOS) serial console of partition#2 (STOPPED )
3) OS(BIOS) serial console of partition#3 (FAULT )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
iSPyz> V<ENTER>
----- Virtual System Operator Panel --------------------- 01/31/2001,19:30:20 -----
xx 0 HW INITIALIZING yyyyyy xx 1 RUNNING yyyyyy
BIOS messages BIOS messages
SP messages SP messages
xx 2 STOPPED yyyyyy xx 3 FAULT yyyyyy
BIOS messages BIOS messages
SP messages SP messages
----- Enter CTRL+B to quit ------------------------------------------------------------------
:
:
:
:
:
<CTRL>+<B>
A
B
C
D