Paradyne 3166 CSU - Manual (Page 95)

Monitoring and Testing
4-29 3166-A2-GB20-10 November 1998
3. From the Patterns screen, select Abort.
F1
Patterns:
Abort
Send Mon
F2 F3
4. From the Patterns Abort screen, press the desired Function key to abort
either All active test patterns, active Send test patterns, or the active Monitor
(Mon) test pattern.
F1
Patterns: Abort
All
Send Mon
F2 F3
If you select All, the DSU/CSU terminates all active test patterns and displays
the message Command Complete. Skip Step 5.
NOTE:
If you mistakenly choose to abort a test pattern that is not currently
running, a Command Complete message still displays and the test
pattern currently active still runs. Use the TStat branch to view the test
status to determine if the abort was successful.
5. From the Abort screen, press the Function key that corresponds to the
interface for which you want to abort a test pattern. Use the scroll keys, if
necessary.
F1
Abort: Send or Mon
NET Prt1
F2 F3
The DSU/CSU terminates the selected test pattern and displays the message
Command Complete.