Setting customer identification, Procedure – Paradyne 3166 CSU User Manual

Page 180

Asynchronous Terminal Interface Operation

H-6

3166-A2-GB20-10

November 1998

Setting Customer Identification

The customer identification is used to uniquely identify the DSU/CSU.

Procedure

To change the customer identification (Customer ID):

1. From the Main Menu screen, select Control.

The Control screen appears.

2. From the Control screen, select Customer ID.

The Customer ID screen appears (Figure H-3).

3. Use the Customer ID field to set the customer identification.

The customer identification may be up to 8 characters long.

Select Clear to remove all the characters in the associated field.

4. Select Save to store the information in nonvolatile memory.

In addition to the customer identification, you may also enter a system name,
system location, and system contact. Although only 40 characters are displayed
for these fields, you may enter up to 255 characters. The fields scroll as the
additional characters are added.

ООООООООООООООООООООООООО

main /control/customer id

Customer ID: Node A

Model: 3166

Slot: xx

CUSTOMER ID

Customer ID:

Clear

System Name:

Clear

System Location:

Clear

System Contact:

Clear

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Customer
Identification
Field

Figure H-3.

Customer Identification Screen

This manual is related to the following products:

3166 DSU