Paradyne 3166 CSU - Manual (Page 46)

SDCP Operation
3-20 3166-A2-GB20-10 November 1998
Selecting the Port
The SNMP manager, Telnet device, external LAN adapter, or network device
(e.g., a router) can be directly connected to the communications (COM) port.
The COM port can support either synchronous or asynchronous PPP, or
asynchronous SLIP at data rates of up to 19,200 bps.
The example below shows how to select the COM port as the link to the SNMP or
Telnet system.
"
Procedure
To select the COM port as the SNMP or Telnet link:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the User selection appears on
the screen.
5. Select User.
F1
Edit:
Chan
Gen User
F2 F3
6. Press F1 (Next) until the Com Use configuration option appears.
7. Select Mgmt to configure the COM port as the SNMP or Telnet link.
F1
Com Use:
Next
Mgmt ASCII
F2 F3