Paradyne 3166 CSU - Manual (Page 59)

SDCP Operation
3-33 3166-A2-GB20-10 November 1998
4. Line 1 displays the 24 channels for the network interface. Line 2 displays
what is allocated to the DS0 channel shown in Line 1. Pressing the or
key scrolls the channels onto the screen in groups of three. Select the
channel by pressing the Function key under the desired number. Port
n
appears. The port is assigned to that channel. To deallocate a port, press the
Function key under that port number. Pressing the Function key under
channels assigned to other ports has no effect.
F1
N1 N2
Next Prt1 Prt1
F2 F3
Clearing DS0 Channel Allocation
You can clear (deallocate) all the DS0 channels currently allocated to either the
network interface or the synchronous data ports.
"
Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the key until the Chan selection appears on
the screen.
5. Select Chan.
F1
Edit:NET
NET
Chan Gen
F2 F3
6. From the Channel Config screen, select Clear.
F1
Channel Config:
Dsply
Clear Prt1
F2 F3