Paradyne 3166 CSU User Manual

Page 183

Asynchronous Terminal Interface Operation

H-9

3166-A2-GB20-10

November 1998

2. From the Load Configuration From screen, select a configuration option set

to load (Current, Customer 1, Customer 2, Default Factory 1, or Default
Factory 2). You cannot edit the Default Factory configuration options, but you
can display them.

After selecting the set of configuration options to load, the Configuration
Edit/Display screen appears (Figure H-6).

ООООООООООООООООООООООООО

main /config/edit

Customer ID: Node A

Model: 3166

Slot: xx

CONFIGURATION EDIT/DISPLAY

Network

Sync Data Port

Cross Connect

General Options

User Interface

Alarms & Traps

Management and Communication

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Figure H-6.

Configuration Edit/Display Screen

3. Select a functional group to display or edit.

NOTE:

Screen displays may vary depending on the model and configuration of the
DSU/CSU. For example, DTE and Copy Ports are not displayed for the
single-port DSU/CSU.

This manual is related to the following products:

3166 DSU