Paradyne 3166 CSU User Manual
Page 108
Configuration Options
C-6
3166-A2-GB20-10
November 1998
Table C-1.
Port Configuration Options (5 of 5)
Far-end: Disab
Next Disab Maint Prev
Far-End Performance Statistics. Specifies whether to monitor for far-end performance
report messages (PRMs) and maintain far-end performance registers for a particular
port.
Disab – Disables far-end performance statistics.
Maint – Monitors the port’s EDL for PRMs and maintains far-end performance statistics.
NOTES: – This configuration option is not available if
EDL is disabled.
– If the local DSU/CSU is configured to maintain far-end performance
statistics, then the remote device must be configured to send near-end
performance statistics.
Mgmt Link: Disab
Next Enab Disab Prev
EDL Management Link. Specifies whether the EDL management link is enabled for a
particular port. Selecting Enab allows SNMP or Telnet traffic to flow over the 4 kbps
in-band data link provided by EDL.
Enab – Enables the port’s EDL management link.
Disab – Disables the port’s EDL management link.
NOTES: – This configuration option is not available if
EDL is disabled.
– If the local DSU/CSU’s EDL is enabled, then the remote device’s EDL
must also be enabled.