Paradyne 3166 CSU - Manual (Page 66)

SDCP Operation
3-40 3166-A2-GB20-10 November 1998
Resetting the DSU/CSU
Use the Reset command to perform a power-on reset of the DSU/CSU.
"
Procedure
To reset the DSU/CSU:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the key until the Reset selection appears
on the screen.
4. Select Reset.
F1
Control:
ClrReg Reset
F2 F3
5. From the Device Reset screen, press F1 to initiate a reset of the DSU/CSU
(the power-up sequence screen appears). Press F2 instead to return to the
Control screen without initiating a reset.
F1
Device Reset:
Yes
No
F2 F3