Paradyne 3166 CSU - Manual (Page 33)

SDCP Operation
3-7 3166-A2-GB20-10 November 1998
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model number, software revision
level, hardware revision level, and customer identification) is available through
the Status branch of the SDCP menu (see Appendix A,
SDCP Menu ).
The customer identification is the only identity number you can change.
"
Procedure
To display the DSU/CSU’s identity (ID):
1. From the top-level menu screen, select Stat.
F1
x:yy DSU ESF
Stat
Test Cnfig
F2 F3
2. From the Status screen, press the key until the ID selection appears on
the screen.
3. Select ID.
F1
Status:
TStat
LED ID
F2 F3
4. The following screens appear in the order listed each time you press
the key.
F1
Identity:
Ser=
xxxxxxx
F2 F3
F1
Identity:
Mod=
xxxx-xx-xxx
F2 F3