Testing a handset – Polycom SpectraLink 8030 User Manual

Page 95

Text mode
Original mode

PN: 1725-36038-001_E.doc

Testing a Handset

Verify proper registration and operation of each handset by
performing the following tests on each handset in an active wireless
area.
1. Power on the handset by pressing the

END

key. A series of

messages will be displayed as the handset acquires the system.
The handset should display the user extension.

2. Place a call and listen to the audio quality. End the call by pressing

the

END

key.

3. Place a call to the handset and verify ring, answer, clear transmit,

and clear receive audio.

4. Use the softkeys to verify all softkey programmed features on the

handset.

5. Press the

END

key. Any line indicators should turn off and the

extension number display will return.

If any of these steps fails to operate as described, refer to Chapter 11
Troubleshooting for corrective action.