Minimum configuration process – Polycom SpectraLink 8030 User Manual
Page 53
Software License and Protocol Management
PN: 1725-36038-001_E.doc
53
Minimum Configuration Process
1. Download the latest SpectraLink 8020/8030 Wireless Telephone
IP software from
.
2. Load the latest version of the SIP code and place it on the TFTP
server and ensure the TFTP server is started. The slnk_cfg.cfg is
downloaded first by the phone, and defines the SIP code files that
will be subsequently downloaded. Be sure to use the slnk_cfg.cfg
file that comes with the latest version of the SIP code and do not
change the order of the files within the slnk_cfg.cfg.
The following six files are included in the typical SIP software
package.
Description
Filename
Configuration
file
slnk_cfg.cfg
PHINTL (language translation) pi1400sp.bin
USB
downloader
pd14udsp.bin
Over-The-Air Downloader (OTADL)
pd14odsp.bin
OTADL
Shim
pd14shim.bin
Functional (telephony protocol) pd14csp.bin
3. Use the Handset Administration Tool to set up the configuration
of each handset to meet all essential requirements. If not using the
Handset Administration Tool, ensure the following parameters
are correctly set in the
Admin
menu for each handset: See
Chapter 2 SpectraLink 8020/8030 Wireless Telephone Configuration
for detailed configuration instructions.
—
If statically assigning IP addresses, ensure that the
Phone
IP
,
Subnet Mask
, and
Default Gateway
information are accurate. If
using a DHCP Server, ensure that the DHCP option is set.
—
Ensure the handset has properly configured
SSID
and
Reg
Domain
information.
—
Ensure the
Telephony Protocol
menu option is set to
36
. This
ensures the handset will check for the proper SRP files each
time it powers on.
—
Ensure security settings are properly programmed.