Polycom SpectraLink 8030 - Manual (Page 30)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
30 PN: 1725-36038-001_E.doc
Phone Config
Telephony Protocol
Telephony Protocol lets you select the VoIP protocol that your site is
licensed to download and run. The SIP protocol used for the
SpectraLink 8020/8030 Wireless Telephones requires license option
selection
36 . Any other protocol will cause the handset to
malfunction.
Push-to-talk (PTT)
PTT is disabled by default. When enabled, all 24 PTT channels are
allowed by default. To toggle the allowed status of any channel, select
Allowed Channels , scroll to the channel to be disallowed and press
NavOK . Allowed channels are displayed with an asterisk (*) in the left
column. Only those channels allowed in the Admin menu will appear
on the Config menu where they can be subscribed to by the end user.
The priority channel, labeled by default as channel 25, may be set and
will be available to all PTT handsets. When a PTT broadcast is made
on the priority channel, it will override any active PTT transmission
on all other channels.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time
(GMT) is the default.
Daylight Savings
The handset may be adjusted for daylight savings time.
Password Enable/Disable/Change
The password option controls access to the Admin menu. It is enabled
by default with the password 123456. The Password option operates as
a toggle between Enabled and Disabled . The info line will display the
current state. Press NavOK to change the password protection state. To
modify the password requirement, the default or previously set
password must be entered to verify the change.
Change Password will
appear only if the password is enabled. The password is disabled by
default. The password must be set in each handset for which
controlled access is desired.