Polycom SpectraLink 8030 - Manual (Page 107)

Diagnostic Tools
PN: 1725-36038-001_E.doc 107
All syslog messages will include:
• Date and time (to 1/100th of second) since handset power on (The
handset time is set when it is powered on to Jan-1 00:00.00 GMT
adjusted. If it has obtained a time from the network time server,
that time will display instead.)
• Handset’s MAC address
• Handset’s IP address
• Sequence number
The table below lists the additional items in each message type:
Failed Handoff
(Sent whenever the handset
attempted to handoff, but failed
trying.) Failed AP MAC
Failed AP signal strength
Current AP MAC
Current AP signal strength
Failure reason
Wireless Telephone Transmit Power to Old AP
Wireless Telephone Transmit Power to New AP
FCCKM
‡ – Failed to use CCKM for fast handoff
FOKC ‡ – Failed to use OKC for fast handoff
Successful Handoff New AP MAC
New AP signal strength
Old AP MAC
Old AP signal strength
Reason for handoff
Other candidate APs:
MAC
Signal
strength
Reason not used
Wireless Telephone Transmit Power to Old AP
Wireless Telephone Transmit Power to New AP
FCCKM
‡ – Failed to use CCKM for fast handoff
FOKC ‡ – Failed to use OKC for fast handoff
Security Error AP MAC
AP signal strength
Security mode
Error details (mode-dependent)
Call Start Call type (telephony, OAI, PTT)
AP MAC
AP signal strength