Polycom SpectraLink 8030 User Manual

Page 74

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

PN: 1725-36038-001_E.doc

#---------------------------------------------------------------------------------------------#
#---------------------------------------------------------------------------------------------#

## FOR EACH PROXY TYPE LISTED ABOVE POLYCOM HAS FOUND THE FOLLOWING

## VALUES TO WORK WELL DURING TESTING, THOUGH YOUR SPECIFIC
## CONFIGURATION MAY VARY. UNCOMMENT OUT THE FIELDS PRECEEDED BY A

## SINGLE # TO ACCEPT THESE VALUES
## ADDITIONAL INFORMATION ABOUT EACH OF THESE FIELDS AS WELL AS SPECIFIC
## CONFIGURATION EXAMPLES CAN BE FOUND FURTHER DOWN IN THIS FILE

#---------------------------------------------------------------------------------------------#
#---------------------------------------------------------------------------------------------#

## FOR PROXY1_TYPE = ASTERISK

#PROXY1_ADDR = 172.29.65.6:5060

# replace the ip address with the Asterisk

Server's Address

#PROXY1_KEYPRESS_2833 = enable
#PROXY1_KEYPRESS_INFO = disable

#PROXY1_HOLD_IP0 = disable
#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600

#PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = axlx.engr.local # Replace this with your SIP Domain's name
#PROXY1_CALLID_PER_LINE = disable

#PROXY1_MAIL_ACCESS = 7999

# Put Your Voice Mail System’s Pilot Number here

#---------------------------------------------------------------------------------------------#

## FOR PROXY1_TYPE = MITEL

#PROXY1_ADDR = 172.29.102.160:5060 # replace the ip address with your PBX's Address
#PROXY1_KEYPRESS_2833 = enable

#PROXY1_KEYPRESS_INFO = disable
#PROXY1_HOLD_IP0 = enable
#PROXY1_PRACK = enable

#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN =

# Put Your SIP Domain's Name Here

#PROXY1_CALLID_PER_LINE = disable
#PROXY1_MAIL_ACCESS = 7000

# Put Your Voice Mail System’s Pilot Number here

#---------------------------------------------------------------------------------------------#

## FOR PROXY1_TYPE = CCME

#PROXY1_ADDR = 172.24.144.107:5060 # replace the ip address with the UCME's Address

#PROXY1_KEYPRESS_2833 = disable
#PROXY1_KEYPRESS_INFO = enable
#PROXY1_HOLD_IP0 = enable

#PROXY1_PRACK = enable
#PROXY1_REREG_SECS=3600
#PROXY1_KEEPALIVE_SECS=14

#PROXY1_DOMAIN =

# Put Your SIP Domain's Name Here

#PROXY1_CALLID_PER_LINE = disable
#PROXY1_MAIL_ACCESS = 7999 # Put Your Voice Mail System’s Pilot Number here

#---------------------------------------------------------------------------------------------#

## FOR PROXY1_TYPE = PINGTEL

#PROXY1_ADDR = 172.24.144.127:5060 # replace the ip address with the Pingtel's
Address