Polycom SpectraLink 8030 - Manual (Page 126)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
126 PN: 1725-36038-001_E.doc
Message Description Action
No SVP Server Handset can’t locate SpectraLink 8000
SVP Server. IP address configuration of SpectraLink
8000 SVP Server is wrong or missing.
SpectraLink 8000 SVP Server is not
working. Check error status screen on
SpectraLink 8000 SVP Server.
No LAN connection at the SpectraLink
8000 SVP Server. Verify SpectraLink 8000 SVP Server
connection to LAN.
No SVP Server
No DNS Entry Handset unable to perform DNS
lookup for SVP Server, server had no
entry for SVP Server. The network administrator must verify
that a proper IP address has been
entered for the SVP Server DHCP
option 151.
No SVP Server
No DNS IP Handset unable to perform DNS
lookup for SVP Server, no IP address
for DNS server. The network administrator must verify
proper DHCP server operation.
No SW Found A required software component has
not been identified. Check that the handset license type has
a corresponding entry in the
slnk_cfg.cfg file.
Check that the pd11sid.bin and
pi110000.bin entries exist in under this
license type in the slnk.cfg.cfg file.
No TFTP
Response The handset could not get the TFTP
server to respond. The handset will continue to boot
without checking if its current code is
the latest available. Check that the
TFTP server is operational. If the
Wireless Telephone is using DHCP,
check that the DHCP options are set
correctly.
No WPA
PassPhrase This error only appears when the
Admin Menus are exited. The handset
is configured for WPA-PSK or WPA2-
PSK and no pass phrase or shared
key has been entered. Enter the pass phrase or pre-shared
key and restart the handset
Not Installed! A required software component is
missing. Check that all required software files
are on the TFTP server, if over-the-air
downloading is being used. If the error
repeats, contact Polycom Technical
Support.
Press END The far end of a call has hung up. Hang up the near end.
Press END to quit The handset is waiting to acquire
bandwidth required for voice
communication. Press END or wait until bandwidth is
available.
Prom Bad Length The handset software downloaded files
that are incorrect or corrupted. Download new software from the OEM
site per
Software Maintenance .