Polycom SpectraLink 8030 - Manual (Page 128)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
128 PN: 1725-36038-001_E.doc
Message Description Action
TFTP
ERROR(x):yy A failure has occurred during a TFTP
software download. (x) = The file
number which was being downloaded;
yy is an error code describing the
particular failure. Possible error codes
are:
01 = TFTP server did not find the
requested file.
02 = Access violation (reported from
TFTP server).
07 = TFTP server reported "No such
user" error.
16 = No TFTP server address.
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did
not respond within a specified period of
time. Error code 01, 02, 07, or 16 - check the
TFTP server configuration.
Error code 81, the handset will attempt
to download the file again.
For other messages, power off the
handset, then turn it on again to retry
the download. If the error repeats, note
it and contact Polycom Customer
Support.
Too Many Errors The handset continues to reset and
cannot be recovered. Fatal error. Return handset to Polycom.
Unknown
xx:yy:zz A phrase is missing from the phintl file. Download new software from the
Polycom website per Software
Maintenance
.
Updating … The handset is internally updating its
software images. None. The handset may do this briefly
after a download. This is informational
only.
Updating Code… Handset is downloading new software
into memory. The number icons at the
bottom of the display indicate which file
number is currently being downloaded.
This message also displays a progress
bar. When the progress bar fills the
display line the update operation is
complete on that file. None. When the progress bar fills the
display line the update operation is
complete on that file.
Do not turn the handset off during this
operation.
Wait for bandwidth The phone is waiting for bandwidth
sufficient for voice communication.
No action required. You will have the
option of pressing END to abort the
phone call.
Waiting… Handset has attempted some
operation several times and failed. None. The handset is waiting for a
specified period of time before
attempting that operation again.
Wrong Code Type The software loaded into the handset
is incorrect for this model phone.
Replace the software image on the
TFTP server with software that is
correct for the handset model.