Polycom SpectraLink 8030 - Manual (Page 113)

Certifying the Handsets
PN: 1725-36038-001_E.doc 113
The handset configured for 802.11g requires:
— -60dBm when all 802.11g data are available (with only 6Mbps
set Required)
— -45dBm when 54Mbps is set Required and other 802.11g rates
Required, Enabled or Disable
802.11
Radio Standard Minimum Available
Signal Strength (RSSI)
Maximum
“Mandatory” Data
Rate
-60 dBm 6 Mb/s
802.11g
-45 dBm 54 Mb/s
— The critical factor is the highest data rate set Required or
Mandatory. Other 802.11g data rates can be set Required,
Enabled or Disabled. The highest data rate set Required or
Mandatory determines the RF power available to the wireless
telephone for proper operation.
— -45dBm when 54Mbps is set Required and other 802.11g rates
Required, Enabled or Disable
The handset configured for 802.11g requires:
— -60dBm when all 802.11a data are available (with only 6Mbps
set Required)
— -45dBm when 54bps is set Required and other data rates
Required, Enabled or Disabled
802.11
Radio Standard Minimum Available
Signal Strength (RSSI)
Maximum
“Mandatory” Data
Rate
-60 dBm 6 Mb/s
802.11a
-45 dBm 54 Mb/s
— The critical factor is the highest data rate set Required or
Mandatory. Other 802.11a data rates can be set enabled or
disabled. The highest data rate set Required or Mandatory
determines the RF power available to the wireless telephone
for proper operation.
3. Finally, use the single AP ( MyID / Detl ) display to check each AP, to
ensure it is configured for the proper data rates, beacon interval,
802.11 options enabled, QoS method, and security method.