Polycom SpectraLink 8030 - Manual (Page 63)

Programming the SIP Handset Features
PN: 1725-36038-001_E.doc 63
Parameter Value Description Notes
PROXYn_
MAIL_ACCESS [email protected]
or Contact to whom the
handset should invite to
access the mail center.
This is the main voicemail
dial number. n = 1, 2, 3
name = mail server contact
name.
xxx.xxx.xxx.xxx = IP
address
sip:name@domain Domain where the mail
resides.
PROXYn _
MAIL_NOTIFY [email protected]
or Contact from whom mail
notification originates. See
config file example for
more information. n = 1, 2, 3 4
name = mail server contact
name.
5
xxx.xxx.xxx.xxx = IP
address.
sip:name@domain Domain where the mail
resides.
PROXYn_
REREG_SECS
Not used in
8020/8030 35 seconds to
3600 seconds
*default 3600 seconds The requested expiration
interval in REGISTER
request messages. n = 1, 2, 3
If the server has a lower
maximum setting or a
higher minimum setting
than that requested, the
server response takes
precedence.
See example file
PROXYn_FAILOVER
IP_ADDRESS xxx.xxx.xxx.xxx:pppp
or
proxyname:pppp The IP address of the
Interactive Intelligence
failover call server. n = 1, 2, 3
xxx.xxx.xxx.xxx = IP4
address
pppp = port (optional, 5060
is the default)
proxyname = computer
name (DHCP only)
server automatically creates and renews subscriptions when the handset registers, then only the
PROXYn _MAIL_NOTIFY contact need be specified. If the handset must subscribe to a particular contact to get mail
notification, then only the PROXYn_MAIL_SUBSCR contact needs to be specified.
4 Values as above.
5 For Inter-Tel SIP servers, both PROXYn_MAIL_SUBSCR and PROXYn_MAIL_NOTIFY parameters must be set in
the configuration file.