Polycom SpectraLink 8030 - Manual (Page 37)

SpectraLink Wireless Telephone Configuration
PN: 1725-36038-001_E.doc 37
on the phone is deleted. If the RADIUS server has enabled
“anonymous in-band PAC provisioning”, then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning, the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual PAC Provisioning section later in
this chapter.
Custom – QoS
The Mode may be set to either * SVP or Wi-Fi Standard . SVP mode uses
the SVP Server to provide enterprise-grade QoS. DSCP tags are used to
change the priority settings for various classes of packets as they are
transmitted to the network from the Wireless Telephone. Default
values are given but may be overwritten:
WT in call = 46 , WT standby =
26 , Other = 0 .
Wi-Fi Standard QoS mode uses standards-based traffic controls for QoS,
instead of the SVP Server. DSCP tags are used to change the priority
settings for various classes of packets as they are transmitted to the
network from the Wireless Telephone. Default values are given but
may be overwritten:
Voice = 46 , Control = 26, Other = 0 . Admission Cntrl is
used to enable and disable the use of WMM Admission Control by
the handset for the AC_VO and AC_VI access categories. If the
WLAN is using WMM Admission Control, the handset should be set
to
*Mandatory . If the WLAN is not using WMM Admission Control,
the handset should be set to *Optional . See the Best Practices Guide for
Deploying SpectraLink 8020/8030 Wireless Telephones for a detailed
explanation of the use of WMM Admission Control.
CCX
CCX settings configure the handset for operation as a CCX V4
certified client.
WPA2-Enterprise
The Authentication setting can select either *EAP-FAST or PEAP as the
authentication method for RADIUS server such as those from
Cisco, Microsoft, or Juniper.
Note that for
Fast Handoff , the only selection available is * CCKM .
Username : Enter a username that matches an entry on your
RADIUS server. Alphanumeric strings can be entered using the
alphanumeric string entry technique.