Polycom SpectraLink 8030 User Manual

Page 29

SpectraLink Wireless Telephone Configuration

PN: 1725-36038-001_E.doc

level

[802.11 Config]

a Æ

[ 802.11a]†
5.150–5.250
5.250–5.350 DFS
5.470–5.725 DFS
5.470-5.650 DFS
5.725–5.825
5.725-5.850

‡b & b/g mixed
g only

[Transmit Power]
5mW (7dBm)
10mW (10dBm)
20mW (13dBm)
*30mW (15dBm)
40mW (16dBm)
50mW (17dBm)
100mW (20dBm)

Diagnostics

Run Site Survey

Diagnostics Mode

*Disable
Enable

Syslog

Mode

*Disabled
Errors
Events
Full

Error

Handling

Mode

Halt on Error/

*Restart on Error

Restore Defaults

Graphics Demo

* default setting

† Only those 802.11a bands that are available in the selected domain will be listed. See Appendix A for
complete information.

‡

Subbands have not been established for the b and b/g mixed or the g-only mode at this writing.

Provision is made in the software to accommodate these ranges once established. Until added, selecting
either of these two modes will immediately bring up Transmit Power options.