Polycom SpectraLink 8030 - Manual (Page 86)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
86 PN: 1725-36038-001_E.doc
If you want to… Then…
Place a second call 1 To get a dial tone for the second call, press LINE and NavOK.
a. If the handset has multiple lines, press LINE + [the line number].
b. Press NavOK.
• The first call is automatically placed on hold.
• The second call appears in a new call tab.
2 Dial the number to place the second call.
3 Use
the Nav ef keys to toggle between calls.
Place a call on a
different line
1 Press the LINE key.
2 Navigate to the desired line and press NavOK or press the number of the
line.
3 Dial the number.
4 Press
START or NavOK to initiate the call.
Answer a call • Press START, and hold the handset to your ear.
• Press NAV OK, and hold the handset to your ear.
• Press the Answ softkey and hold the handset to your ear.
• Press the Spkr softkey and speak towards the handset.
Reject a call Press the Rej softkey to reject the call and allow the SIP server to redirect the
call elsewhere, usually to voicemail.
Answer a call on a
second line
If another call comes in on a different line, a new call icon flashes and a tone
sounds in the audio stream until the call is answered, the first call is terminated,
the caller hangs up, or the call transfers to voicemail.
1 To view the caller ID of the incoming call without interrupting the active call,
press Nav f. The original call’s audio remains active. The display now
shows information about the incoming call.
2 Press NavOK, START or Answ to place the current call on Hold and answer
the second call, or
Press Rej to redirect the incoming call to voicemail or as otherwise
programmed.
Navigate among call
tabs
Use Nav► and Nav◄.