Polycom SpectraLink 8030 - Manual (Page 24)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
24 PN: 1725-36038-001_E.doc
Opening the Admin menu
The handset Admin menu can be accessed in one of two ways:
1. With the handset powered off, press and hold the
START key.
While holding the START key, press and release the END key. When
the Admin menu appears, release the START key.
2. Press and release the END key. Press and hold the START key.
When the Admin menu appears, release the START key.
If an admin password has been set, the display will require its entry
before opening the
Admin menu. The default password is 123456. If
no password is set, the display will proceed directly into the Admin
menu.
Navigation
The navigation keys just below the softkeys are used to navigate
through and select menu options. These are referred to as
Nav ▲,
Nav ▼, Nav ◄, Nav ►, and NavOK .
Toggle options
Some menu items have only two options, which operate on a toggle
basis. The current setting is shown below the menu heading on the
info line. The other available setting is highlighted in the menu list.
Press
NavOK to activate the highlighted setting.
For example, when predial is disabled, the info line displays Predial
Disabled and the highlighted menu item is the Enable Predial option.
Press NavOK to enable predial. The info line will change to display
Predial Enabled .
In another example, when the info line displays Ring in Speaker , the
highlighted menu option is Ring in Headset . Press NavOK to select Ring