Polycom SpectraLink 8030 - Manual (Page 83)

Using the SIP Handset
PN: 1725-36038-001_E.doc 83
Menus
Line menu
The Line menu allows you to activate a call on a selected line or to
view the status of lines.
Pressing the
LINE key from the active mode displays a menu of line
appearances as programmed in the SIP TFTP configuration file. The
LINE key can be pressed while the handset is in the standby mode to
activate the handset and to activate a new call on the selected line.
The currently selected line is indicated by an asterisk (
* ). Lines for
which the corresponding proxy server has outstanding new mail are
flagged with plus (
+ ) characters. Lines that should be registered to a
proxy but have failed registration for any reason are displayed in
faded text and are not selectable from the menu.
Exit the
LINE display by pressing a line number key to start a new call
on the selected line and put any other call on hold, or by pressing the
END key to exit without starting a new call. Press the More softkey to
page through additional items on the Line menu.
Symbol menu
The symbol menu allows you to change the set of characters available
for data entry through multiple key presses of the dial pad keys.
While dialing a number or entering login information, press the
Symb
softkey to view a menu of possible sets of characters that can be
entered using multiple key presses of the dial pad keys. Normally, a
simple numeric mode is selected; selecting other symbol modes
allows convenient access to the complete printable US ASCII
character set. The following table shows what characters are available
through repeated key presses in various symbol modes.
Key Number English Number + English Punctuation
1 1 1 ; : / \ ! ‘ 1 @ : 1
2 2 a b c 2 A B C 2 A B C a b c ; , 2
3 3 d e f 3 D E F 3 D E F d e f & | ` ~ 3
4 4 g h I 4 G H I 4 G H I g h i ( ) 4
5 5 j k l 5 J K L 5 J K L j k l < > 5
6 6 m n o 6 M N O 6 M N O m n o { } 6