Polycom SpectraLink 8030 - Manual (Page 54)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
54 PN: 1725-36038-001_E.doc
4. Configure handset security settings to match AP configuration
and RADIUS server settings. If WPA2-Enterprise security is used,
credentials will need to be installed onto the handset. For EAP-
FAST, the PAC file needs to be provisioned and for PEAP the
handset will need to be enrolled with a certificate (requires use of
the HAT). See the WPA2 Enterprise PEAP Certificate Enrollment and
EAP-FAST PAC Provisioning section in this guide for details.
5. Configure the QoS handset mode to match the AP and site QoS
plan. Follow the VIEW Configuration Guide for the appropriate
make/model of WLAN.
6. Power cycle the handset.
7. The SIP code will now download to the handset. The status bar
will increment fully across the display for each function that is
being performed in the download process. Upon completion of
the update process, the handset will re-boot with the new
firmware.
During the second download evolution, the handset receives code
from the TFTP server for system configuration and for its own
settings. Once this second evolution is complete, the handset is ready
to use.
For future software upgrades, simply update the files that are stored
on the TFTP server. Each time the handset is powered on, it will
check with the TFTP server to ensure it has the proper software
version.