Polycom SpectraLink 8030 - Manual (Page 64)

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
64 PN: 1725-36038-001_E.doc
Parameter Value Description Notes
AUTH
[see warning note
below] username;password Credentials.
In general credentials are
needed for each
registered line.
6 .
username = The dial
number or string that
identifies the line
appearance. Generally an
extension or phone
number.
password = a secure
password created by the
system administer which
enables a handset to
register and/or function.
CODECS codec1, codec2
e.g. g711u, g711a,
g729
Comma-separated list of
supported codecs in order
of preference. Defaults to “g711u, g711a”.
if either is omitted it will be
added to the end of the list.
LINEn username The dial # or name.
All LINEn user names
should be unique for a
given LINEn_ PROXY.
This may be enforced in
future software revisions. n = 1, 2, 3, 4, 5
The registered contact
becomes:
sip:username@domain
LINEn _PROXY i SIP proxy server for this
line. n = 1, 2, 3, 4, 5
i = the number of the
proxy server 1, 2, 3.
LINEn_PROXY can be
omitted if the line is not to
be registered and you wish
to do direct phone to phone
calls.
LINEn _CALLID callerid String that displays at the
far end. n = 1, 2, 3, 4, 5
callerid = the text that will
display as the caller ID on
the called handset.
6 WARNING: providing credentials by using the AUTH parameters in the configuration files is a security risk and
should be avoided by entering usernames and passwords in Admin menu or by allowing the user to login at startup
time. Credentials entered here are in plain text and accessible by anyone who can access the TFTP server files.
Credentials stored in the SIP server or in the handsets are protected.