Polycom SpectraLink 8030 - Manual (Page 23)

PN: 1725-36038-001_E.doc 23
SpectraLink 8020/8030 Wireless
Telephone Configuration
Each handset may be configured for site-specific requirements by
opening the
Admin menu and selecting options or entering specific
information. Any settings entered in the Admin menu must conform to
system settings. Only the handset being configured is affected by the
Admin menu settings.
The wireless telephone user may select several usability options from
the Standby menu, described below in the User-defined Preferences
section. This information is also provided in the end-user manual.
The SpectraLink Handset Administration Tool is a software utility
that enables rapid configuration of handsets by utilizing the USB port
on the Dual Charger. See the Handset Administration Tool (HAT)
document for specific instructions. Please see your service
representative or contact Polycom customer service for more
information about this time-saving tool.
When WPA2 Enterprise security is used, PAC files for EAP-FAST can
be provisioned wirelessly or by using the HAT. For PEAP, the HAT
must be used to enroll certificates. See section WPA2 Enterprise PEAP
Certification Enrollment and EAP-FAST PAC Provisioning at the end of
this chapter for details.
Other settings that must be configured include, but are not limited to,
WLAN QoS, DSCP tagging, DHCP and regulatory domain
information. If these are not selected by the administrator the handset
will use the default settings.
The Admin Menu
The Admin menu contains configuration options that are stored locally
(on each handset). Each handset is independent, and if the default
settings are not desired, the
Admin options must be set in each handset
requiring different settings.
2