Call status icons – Polycom SpectraLink 8030 User Manual
Page 80
SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
80
PN: 1725-36038-001_E.doc
Indicator Function
Up and down arrows are displayed when the menu has additional options
above or below.
Left or right arrows are displayed during editing when the cursor may be
moved left or right.
The Push-to-talk (PTT) ring icon. A PTT call is coming in.
The priority PTT ring icon. A call is coming in on the priority PTT channel.
This call will override any other.
Location Service icon: indicates the Ekahau Real-Time Location System
(RTLS) is enabled.
Locked Locked indicates that the keypad is locked to prevent accidental activation.
Use the Unlk softkey plus the # key to unlock it.
[No Service
message]
If warning tones are not disabled, an alarm will sound and a descriptive
message displays when the handset cannot receive or place calls. You may
be outside of the covered area. Walk back into the covered area. The in-
service tone indicates service is reestablished.
The download icon indicates that the handset is downloading code. This
icon only appears while the handset is running the over-the-air downloader.
It appears to the right of the Signal Strength icon in the same location as the
Voicemail icon.
XXXX During character entry, Indicates current data entry symbol mode.
Call status icons
Indicator Function
On-hook icon, Solid when in standby mode to indicate that at least one call
is still active or on hold. Flashing when incoming call is ringing.
Off-hook icon. Solid when a call is being dialed.
Hold icon. Call is on hold
Transfer icon. Call is in the process of being transferred
Audio flowing icon. Audio is flowing both ways on a call.
Audio receive-only icon. Locally muted (flash) or far end hold with no music
on hold.
No audio icon. No audio is flowing. Call is terminating or far end hold with
audio disable.