Printronix H-SERIES P7000 - Manual (Page 98)

98
Chapter 4 EMULATION
Page Format Submenu
Page Format
• Margins. You can set the bottom, left, and right form margins.
• Perforation Skip. Allows or prevents printing on page perforation. When
enabled, it sets up a skip-over margin of
1/2,” 2/3,” 5/6,” or 1.” For example, a skip-over margin of 1” allows a 1”
margin at the bottom of the page perforation. The default is Disable.
• Form Length. The number of lines that can be printed on a page. You
can set forms length in inches or in print lines per page. The most
accurate method is lines per page.
• Form Width. When using paper which is 8-1/2” wide, selecting an 8” print
width prevents printing beyond the right margin and damaging the
hammer tips and platen.
Page Format
(from page 91)
Margins
Left Margin
0* columns
(0-369)
Right Margin
0* columns
(0-369)
Bottom Margin
0* lines
(0-451)
* = Factory Default for Hanzi and Hangul printer
** = Factory Default for Kanji printer
Perforation
Skip
Disable*
1/2 inch
2/3 inch
5/6 inch
1 inch
Form
Length
Abs. Length IN
11.0* inches
08.5** inches
(0.1-24)
Abs. Length MM
279.4* mm
215.9** mm
(0.1-609.6)
Funct. of Lines
66* Lines
68** Lines
(1-192)
Form
Width
Abs. Width IN
13.6* inches
(0.1-13.6)
Abs. Width MM
345.5* mm
(0.1-345.5)
Funct. of CPI
136* Characters
204** Characters
(1-272)